High-Temperature Ekolak SX

Send inquiry

It is based on a blend of silicone and polyester resins. The composition of the resin itself makes it suitable for high temperature loads up to a maximum of 450°C depending on the combination of polyester and temperature resistance. It also offers good mechanical properties. Pre-treatment by shot blasting is highly recommended.

Properties of powder:

  • Density (ISO 8310-3): 1.2 – 1.7 g/cm3, depending on colour.
  • Yield: 9.8 to 13.8 m2/kg at an application thickness of 60 μm, depending on colour.
  • Granulation (Malvern granulometer): particles over 40 μm … 45-55%.

Application method: conventional CORONA process, negative voltage 30-100 kV, it is also possible to supply powder adapted for TRIBO application (T at the end of the marking, e.g. E/P-XX-X-xxxxx T). It is mandatory to adjust the temperature of the powder coating to the temperature of the coating line before applying it on the coating line.

Technical information

Technical data


Other types of ekolak powder coatings